HomeMy WebLinkAboutARB201200129 Legacy Document 2012-10-19 (2)SIGN DETAIL
LJ APPROVED ❑ APPROVED W/REVISIONS ❑ RESUBMIT X
FRONT ELEVATION
ALBEMARLE COUNTY SIGN CODE: WALL SIGNS - ALLOWED 1.5 SF PER LINEAR FOOT OF BUILDING FRONTAGE - NTE 200 SF FOR ALL WALL SIGNS
NOTE: THE LEVEL OF ILLUMINATION PROVIDED BY THE LED LIGHTS WILL NOT EXCEED THE ILLUMINATION PRODUCED BY A SINGLE STROKE OF 30 MILLIAMP(MA) NEON.
SCALE: 3/32 " =V -0"
Client: The Fresh Market SIGN PLACEMENT MAY CHANGE Drawing scale: Proportional j�7� 2165 Seminole Trail Layout by: Marcie Rengifo ❑x Preliminary Drawing
Location: Albemarle Square we cannot guarantees =aa color matcbas. Drawing location: JN80uu u 1EDW Charlottesville, VA 22901 phone: (800)482 -6603 x114 ❑ Final Drawing
Al l sizes and dimensions are illustrated for
Charlottesville, VA 22901 clienfe conception of projea and are not to be ��� fax: (434)974 -6898
Phone /Email: understood asbaingexacl size ofexaclscale. Revision #: marcie@htsva.com PAGE 1 OF 2
Copyright Warning: This is an original unpublished design created by Hightech Signs. It is submitted for your personal consideration, it is not to be shown to anyone outside your organization nor is it to be reproduced or exhibited in any fashion whatsoever. It remains the property of Hightech Signs until legally purchased.
SIGN DETAIL
Lj APPROVED Lj APPROVED W/REVISIONS L RESUBMIT X
MANUFACTURING /INSTALLATION NOTE:
LETTERS TO BE MADE SEPARATELY BUT
APPEAR CONNECTED WHEN INSTALLED
SIGN TYPE &,% MANUFACTURE AND INSTALL ONE (1) SET FACE -LIT INTERNALLY ILLUMINATED CHANNEL LETTER LAYOUT 139 SQ.FT.
Scale: 3/16"=1'-0"
LETTER SPECIFICATIONS:
INDIVIDUAL, INTERNALLY ILLUMINATED CHANNEL LETTERS
CHANNELS FABRICATED WITH ALUMINUM
INTERIOR OF LETTERS FINISHED WHITE FOR EVEN LIGHT DISTRIBUTION.
LOW VOLTAGE POWER SOURCE
FACES OF CYRO ACRYLIC #SG 5200 -0 GREEN
BANDED WITH A 1 "GREEN TRIM CAP MOLDING
STAND OFF FROM WALL IS 1/2"
NOTE: PRIMARY ELECTRIC TO SIGN SITE (BY OTHERS)
NOTE: THE LEVEL OF ILLUMINATION PROVIDED BY THE LED LIGHTS WILL NOT EXCEED THE ILLUMINATION PRODUCED BY A SINGLE STROKE OF 30 MILLIAMP(MA) NEON.
ly... /�—
NON—STANDARD
CUSTOM SIZE i
28' -6"
E FRESH
MANUFACTURING /INSTALLATION NOTE:
LETTERS TO BE MADE SEPARATELY BUT
APPEAR CONNECTED WHEN INSTALLED
SIGN -E A MANUFACTURE AND INSTALL ONE (1) SET FACE -LIT INTERNALLY ILLUMINATED CHANNEL LETTER LAYOUT 52.25 SQ.FT.
M Scale: 3/16 " =1' -0"
LETTER SPECIFICATIONS:
INDIVIDUAL, INTERNALLY ILLUMINATED CHANNEL LETTERS
CHANNELS FABRICATED WITH ALUMINUM
INTERIOR OF LETTERS FINISHED WHITE FOR EVEN LIGHT DISTRIBUTION.
LOW VOLTAGE POWER SOURCE
FACES OF CYRO ACRYLIC #SG 5200 -0 GREEN
BANDED WITH A 1 "GREEN TRIM CAP MOLDING
STAND OFF FROM WALL IS 1/2"
NOTE: PRIMARY ELECTRIC TO SIGN SITE (BY OTHERS)
MATERIAL FINISH COLORS
BRANCH
Ya" WEEP HOLES (2 MIN.)
(BY OTHERS) FOR SIGN
NOTE: WEEP HOLES NOT REQUIRED ON INTERIOR APPLICATIONS
EXISTING FASCIA
■
GREEN
■
EStandard
EGroon
LEDS
90
EMS 9
4 EMS 34
EMS 349
Letter
Letter
Trim -Cap
Internal
Returns
Faces
Faces Illumination
NOTE: THE LEVEL OF ILLUMINATION PROVIDED BY THE LED LIGHTS WILL NOT EXCEED THE ILLUMINATION PRODUCED BY A SINGLE STROKE OF 30 MILLIAMP(MA) NEON.
ly... /�—
NON—STANDARD
CUSTOM SIZE i
28' -6"
E FRESH
MANUFACTURING /INSTALLATION NOTE:
LETTERS TO BE MADE SEPARATELY BUT
APPEAR CONNECTED WHEN INSTALLED
SIGN -E A MANUFACTURE AND INSTALL ONE (1) SET FACE -LIT INTERNALLY ILLUMINATED CHANNEL LETTER LAYOUT 52.25 SQ.FT.
M Scale: 3/16 " =1' -0"
LETTER SPECIFICATIONS:
INDIVIDUAL, INTERNALLY ILLUMINATED CHANNEL LETTERS
CHANNELS FABRICATED WITH ALUMINUM
INTERIOR OF LETTERS FINISHED WHITE FOR EVEN LIGHT DISTRIBUTION.
LOW VOLTAGE POWER SOURCE
FACES OF CYRO ACRYLIC #SG 5200 -0 GREEN
BANDED WITH A 1 "GREEN TRIM CAP MOLDING
STAND OFF FROM WALL IS 1/2"
NOTE: PRIMARY ELECTRIC TO SIGN SITE (BY OTHERS)
Total: TB•D• Amps
# of 120V, 20A Circuits Req'd TB.D
ALL BRANCH CIRCUITS SHALL BE
DEDICATED TO SIGNS (INCLUDING
GROUND AND NEUTRAL) AND SHALL
NOT BE SHARED WITH OTHER LOADS.
1/211
5" POWER SUPPLY OUTPUT LEAD OR EXTENDED
LEAD USING APPROPRIATE UL LISTED PLTC:
Up to 15' = 18AWG / Up to 50' = 14AWG
ALUMINUM SPACER
J -BOX W/ DISCONNECT
3/16" ACRYLIC WITH SWITCH MOUNTED TO
PLASTIC RETAINERS END OF TRANS. BOX
L.E.D. ILLUMINATORS
AS REQUIRED.
.063 ALUM. BACK
SEAL ENTRY & EXIT
HOLES W/ SILICONE
LOW VOLTAGE
.040 ALUM. RETURNS
POWER SUPPLY
J -BOX (BY OTHERS)
TRIMCAP
MATERIAL FINISH COLORS
BRANCH
Ya" WEEP HOLES (2 MIN.)
(BY OTHERS) FOR SIGN
NOTE: WEEP HOLES NOT REQUIRED ON INTERIOR APPLICATIONS
EXISTING FASCIA
■
GREEN GREEN
■
EStandarnd
EGreen
EDS
EMS 349 EMS 3490
EMS 349
Letter
Letter
Trim -Cap
Internal
Returns
Faces
Faces Illumination
Total: TB•D• Amps
# of 120V, 20A Circuits Req'd TB.D
ALL BRANCH CIRCUITS SHALL BE
DEDICATED TO SIGNS (INCLUDING
GROUND AND NEUTRAL) AND SHALL
NOT BE SHARED WITH OTHER LOADS.
1/211
5" POWER SUPPLY OUTPUT LEAD OR EXTENDED
LEAD USING APPROPRIATE UL LISTED PLTC:
Up to 15' = 18AWG / Up to 50' = 14AWG
ALUMINUM SPACER
J -BOX W/ DISCONNECT
3/16" ACRYLIC WITH SWITCH MOUNTED TO
PLASTIC RETAINERS END OF TRANS. BOX
L.E.D. ILLUMINATORS
AS REQUIRED.
.063 ALUM. BACK
SEAL ENTRY & EXIT
HOLES W/ SILICONE
LOW VOLTAGE
.040 ALUM. RETURNS
POWER SUPPLY
J -BOX (BY OTHERS)
TRIMCAP
BRANCH
Ya" WEEP HOLES (2 MIN.)
(BY OTHERS) FOR SIGN
NOTE: WEEP HOLES NOT REQUIRED ON INTERIOR APPLICATIONS
EXISTING FASCIA
See notes for requirements
DETAIL FOR TYPICAL CHANNEL LETTER WITH ILLUMINATED PLEX FACE W/ REMOTE TRANSFORMER
NOTES:
NOT TO SCALE
1- All seams to be placed for min. visibility. 2- Install to conform w/ section 600 of NEC. 3- Letters fabricated to UL standards
4- Transformer mounting TBD. in field. 5- Letters to be const. to prevent light leaks. 6- Min. 2 mounting bolts per letter.
Branch Circuit:
A. All branch circuits for signs must be totally dedicated to signs (including dedicated ground and dedicated neutral per circuit).
B. Sign circuits must not be shared with other loads such as lighting, air conditioning, and other equipment.
C. Properly sized ground wire that can be traced back to the breaker panel must be provided.
D. Number and size of circuits for each sign to meet Federal Heath Sign's requirement.
CUSTOMER TO PROVIDE:
(For New / Remodel Construction) ADEQUATE BEHIND THE WALL BACKING AND ACCESS AS REQUIRED TO INSTALL
SIGNAGE. CUSTOMER TO FORWARD COPY OF FINAL APPROVED SIGNAGE DRAWINGS TO BUILDING SITE CONTACT
SO THAT THESE PROVISIONS CAN BE MADE DURING CONSTRUCTION AND PRIOR TO SIGN INSTALL,
ALL BRANCH CIRCUITS (PRIMARY ELECTRICAL SERVICE & FINAL CONNECTION) TO EACH SIGN TO BE BY CERTIFIED ELECTRICIAN:
A. All branch circuits for signs must be totally dedicated to signs (including dedicated ground and dedicated neutral per circuit).
B. Sign circuits must not be shared with other loads such as lighting, air conditioning, and other equipment.
C. Properly sized ground wire that can be traced back to the breaker panel must be provided.
D. Number and size of circuits for each sign to meet Federal Heath Sign's requirement.
INSTALLER IS RESPONSIBLE FOR:
PROVIDING AND INSTALLING ALL COMPONENTS REQUIRED TO RUN SECONDARY WIRING (CONNECTORS, GTO CONDUIT,
ETC.) TO BE DETERMINED BY LOCAL CODE AND SITE CONDITIONS.
PROVIDING ALL NEEDED INSTALLATION HARDWARE AS DETERMINED BY LOCAL CODE AND SITE CONDITIONS.
SEALING BUILDING PENETRATIONS WITH SILICONE TO PREVENT MOISTURE PENETRATION @ EXTERIOR LOCATIONS..
Client: The Fresh Market SIGN PLACEMENT MAY CHANGE Drawing scale: Proportional j�7� 2165 Seminole Trail Layout by: Marcie Rengifo ❑x Preliminary Drawing
Location: Albemarle Square We cannot guarantee -act colormatcbas. Drawing location: JN80uu u 1EDW Charlottesville, VA 22901 phone: (800)482 -6603 x114 ❑ Final Drawing
All sizes and dimensions are illustrated for
Charlottesville, VA 22901 client's conception of project and are not to be ��� fax: (434)974 -6898
Phone /Email: understood as beingexacl size ofexaclscale. Revision #: marcie@htsva.com PAGE 2 OF 2
Copyright Warning: This is an original unpublished design created by Hightech Signs. It is submitted for your personal consideration, it is not to be shown to anyone outside your organization nor is it to be reproduced or exhibited in any fashion whatsoever. It remains the property of Hightech Signs until legally purchased.