No preview available
HomeMy WebLinkAboutARB201400070 Legacy Document 2014-09-30 (4)CAN - 304 -PS -RS 304 Series'"Canopy Luminaire - Petroleum Symmetric - Recessed Mount for Product Description Luminaire housing is constructed from rugged die cast aluminum components. LED driver is mounted in a sealed weathertight center chamber that allows for access from below the fixture. Luminaire housing incorporates integral high performance heatsink fins specifically designed for LED canopy application. Luminaire mounts directly to the canopy deck and is secured in place with die -cast aluminum trim frame. Luminaire housing is provided with factory applied foam gasket and provides for a watertight seal between luminaire housing and canopy deck. Integral junction box allows ease of installation without need to open luminaire. Suitable for use in single skin canopies with 16" (406 mm) wide panels. See 227 Series for canopies using 12" (305mm) deck sections. Designed for canopies of 19 - 22 gauge (maximum 0.040" [1 mm] thickness). Performance Summary Utilizes BetaLED° Technology Patented NanoOptic' Product Technology Made in the U.S.A. of U.S. and imported parts CRI: Minimum 70 CRI CCT: 5700K (+ / - 500K) Standard, 4000K ( +/ 300K) Limited Warranty': 10 years on luminaire / 10 years on Colorfast DeltaGuard° finish Ordering Information Example: CAN- 304- PS- RS- 04- E- UL -SV- 350- OPTIONS O im) 56mm) 8.7" (220mm) 9.6" (2441 mm) W rm �2 0 7mm) ika CAN -304 PS RS x 24" (610mm) x 3" (76mm); (48" E above luminaire. ®Beta LED TECHNOLOGY Product CAN -304 •. PS RS 04 E UL •. WH 700' •. 40K 4000K Color Temperature Petroleum Recessed 06 Universal White 700mA - Color temperature per luminaire Symmetric Single 120 -277V (Standard) 525 DIM 0 -10V Dimming Skin UH Sv 525mA Control by others Universal Silver 350 Refer to dimming spec sheet for availability and 347 -480V BK 35OmA additional information Black Can't exceed specified drive current BZ F Fuse Bronze When code dictates fusing use time delay fuse PB Not available with all multi -level options. Refer to Platinum multi -level spec sheet for availability and Bronze additional information ML Multi -Level - Refer to multi -level spec sheet for availability and additional information * See www.cree.com /lighting /products /warranty for warranty terms. Requires marked spacing 48" (1,219mm) x 24" (610mm) x 3" (76mm); (48" [1,219mm] luminaire to luminaire, 24" [610mm] luminaire to side wall, 6" [152mm] above luminaire. ®Beta LED TECHNOLOGY C u` US Amth� NNW Rev. Date: 06/26/13 _ `- — — — — � ■ `�� BOO www.cree.com /lighting T (800) 236 -6800 F (262) 504 -5415 CAN - 304 -PS -RS Product Specifications CONSTRUCTION & MATERIALS • Luminaire housing is constructed from rugged die cast aluminum components • LED driver is mounted in a sealed weathertight center chamber that allows for access from below the luminaire • Incorporates integral high performance heat sink fins specifically designed for LED canopy applications • Provided with factory applied foam gasket and provides for a watertight seal between luminaire housing and canopy deck • Mounts directly to the canopy deck and is secured in place with a die cast aluminum trim frame • Integral junction box allows ease of installation without need to open luminaire • Suitable for use in single skin canopies with 16" (406mm) wide panels • Designed for canopies of 19 -22 gauge (maximum 0.040" [1mm] thickness) • See 227 Series canopies for canopies using 12" (305mm) deck sections • Exclusive Colorfast DeltaGuard° finish features an E -Coat epoxy primer with an ultra - durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Standard is white. Bronze, black, silver, and platinum bronze are also available ELECTRICAL SYSTEM • Input Voltage: 120 -277V or 347 -480V, 50 / 60Hz, Class 1 drivers • Power Factor: > 0.9 at full load • Total Harmonic Distortion: < 20% at full load • Integral weathertight electrical box with terminal strips (1213a -20l3a) for easy power hookup • Integral 10kV surge suppression protection standard • To address inrush current, slow blow fuse or type C / D breaker should be used REGULATORY & VOLUNTARY QUALIFICATIONS • cULus Listed • Suitable for wet locations • Enclosure rated IP66 per IEC 60529 • Consult factory for CE Certified products • 10kV surge suppression protection tested in accordance with IEEE / ANSI C62.41.2 • Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117 • Pending product qualification on the DesignLights Consortium ( "DLC ") Qualified Products List ("QPL") when ordered with PS or SL optics • RoHS Compliant • Meets Buy American requirements within ARRA Lumen Output, Electrical, and Lumen Maintenance Data Photometry All published luminaire photometric testing performed to IESNA LM -79 -08 standards by Independent Testing Laboratories, a NVLAP certified laboratory. ITL Test Report #: 76940 CA N- 304 -PS -* *- 06 -E -U L- 700 -40 K Initial Delivered Lumens: 13,581 CAN - 304 -PS * *- 06 -E -UL- 700 -40K Mounting Height: 15'(4.6m) Initial Delivered Lumens: 13,190 Initial FC at grade IES Files To obtain an IES file specific to your project consult: http: / /www.cree.com /I ig hti ng /tools- and - support /exterior -i es- configuration -tool ' Actual production yield may vary between -4 and +10% of initial delivered lumens. *" For more information on the IFS BUG (Backlight - Uplight- Glare) Rating visit www. iesna. org/ PDF/ Frratas/ TM- 15- 1]BugRatingsAddendum.pdf. * ** For recommended lumen maintenance factor data see TD -13. Calculated L70 based on 6,000 hours LM -80 -08 testing: > 150,000 hours. © 2013 Cree, Inc. All rights reserved. For informational purposes only. Content is subject to change. See www.cree.com /patents for patents that cover these products. Cree ®, the Cree logo, BetaLED ®, NanoOptic® and Colorfast DeltaGuard® are registered trademarks, and the BetaLED Technology logo and 304 Series'" are trademarks of Cree, Inc. www.cree.com /lighting T (800) 236 -6800 F (262) 504 -5415 Now _ WW -_ ■L�i ■► ill■ ■_ ■dill■ . CAN - 304 -PS * *- 06 -E -UL- 700 -40K Mounting Height: 15'(4.6m) Initial Delivered Lumens: 13,190 Initial FC at grade IES Files To obtain an IES file specific to your project consult: http: / /www.cree.com /I ig hti ng /tools- and - support /exterior -i es- configuration -tool ' Actual production yield may vary between -4 and +10% of initial delivered lumens. *" For more information on the IFS BUG (Backlight - Uplight- Glare) Rating visit www. iesna. org/ PDF/ Frratas/ TM- 15- 1]BugRatingsAddendum.pdf. * ** For recommended lumen maintenance factor data see TD -13. Calculated L70 based on 6,000 hours LM -80 -08 testing: > 150,000 hours. © 2013 Cree, Inc. All rights reserved. For informational purposes only. Content is subject to change. See www.cree.com /patents for patents that cover these products. Cree ®, the Cree logo, BetaLED ®, NanoOptic® and Colorfast DeltaGuard® are registered trademarks, and the BetaLED Technology logo and 304 Series'" are trademarks of Cree, Inc. www.cree.com /lighting T (800) 236 -6800 F (262) 504 -5415 Now _ WW -_