Loading...
HomeMy WebLinkAboutARB201400085 ChecklistRESUBMITTAL REVIEW CHECKLIST PROJECT #/NAME: ARB 201400085, Chick -fil -A Signs Original ARB 07/30/2014 Review 08/08/2014 Review 03/17/2015 Review 04/01/2015 Comment • Currently there is no approved Issues: Issues: Issue: OK - Done site plan and no ARB approved • As of 7/30/2014: no • As of 7/30/2014: no Sheet 1 Site Plan and site and building plan. I cannot revised ARB application revised ARB application Sheet 5 Landscape Plan approve this ARB application received (admin. review) received (admin. are not the current until there is site plan approval • Received. Final SDP review) approved plans. and ARB approval of the site under review . Received. Final SDP and building plans. Do not Will need to deny ARB under review begin construction of any signs application by 0 Will need to deny ARB 08/18/2014 if deferral application by until you have both ARB sign request not received. 08/18/2014 if deferral approval and an approved sign request not received. permit. • Re ag rding the freestanding Re ag rding the freestanding Issue: OK - Done sign: sign: Re ag rding the freestanding Sheet 1 Site Plan and sign: 1. Revise the sign drawing 1. Revise the sign Sheet 5 Landscape Plan with notes to clearly 1. Revise the sign drawing with notes to are not the current indicate just what drawing with notes to clearly indicate just approved plans. illuminates. The zoning clearly indicate just what illuminates. The ordinance requires that what illuminates. The zoning ordinance the sign have an opaque zoning ordinance requires that the sign background. Include a requires that the sign have an opaque note that the white have an opaque background. Include background shall be background. Include a a note that the white opaque. note that the white background shall be 2. Revise the sign drawing background shall be opaque. to include the following opaque. Issue: Comment not note regarding LED Issue: Comment not addressed. intensity: addressed. Note: previous The level of illumination Note: previous comment refers to provided by the LED comment refers to white background in lights will not exceed the white background in error. illumination produced by error. Need the following a single stroke of 30 Need the following note on drawing: Original ARB Comment 07/30/2014 Review 08/08/2014 Review 03/17/2015 Review 04/01/2015 milliamp (ma) neon. note on drawing: "Cabinet 3. The sign location and "Cabinet background shall be landscaping around the background shall be opaque; only the sign cannot be opaque; only the text text & graphic shall evaluated until the site & graphic shall illuminate." plan/landscape plan has illuminate." OK - done been approved. 2. Revise the sign 2. The sign location and 4. Sign brick base drawing to include the landscaping around material must match the following note the sign cannot be approved building regarding LED evaluated until the material. Currently, no intensity: site plan /landscape building material has The level of illumination plan has been been approved. provided by the LED approved. Waiting lights will not exceed the for approved SDP illumination produced Final. by a single stroke of 30 milliamp (ma) neon. OK - done 3. The sign location and landscaping around the sign cannot be evaluated until the site plan /landscape plan has been approved. Waiting for approved SDP Final. 1. Sign brick base material must match the approved building material. Currently, no building material has been approved. OK OK — Done - MM confirmed that Warm Gray 3 color Mayo Blend Belden Original ARB 07/30/2014 Review 08/08/2014 Review 03/17/2015 Review 04/01/2015 Comment Brick is what the ARB approved. X Regarding the wall signs: Regarding the wall signs: Regarding the wall signs: OK — SDP and ARB OK 1. The zoning permit 1. The zoning permit 1. The zoning permit applications have been planner will not planner will not planner will not approved. Building evaluate the wall signs evaluate the wall signs evaluate the wall elevation drawings match for compliance with the for compliance with signs for compliance approved ARB elevation zoning ordinance until the zoning ordinance with the zoning drawings sufficiently. the site plan has been until the site plan has ordinance until the approved. been approved. Issue site plan has been 2. The wall signs cannot still remains. approved. Issue still be evaluated for 2. The wall signs cannot remains. compliance with the be evaluated for 2. The wall signs cannot ARB sign guidelines compliance with the be evaluated for until the ARB has ARB sign guidelines compliance with the approved the building until the ARB has ARB sign guidelines design. approved the building until the ARB has 3. Revise the sign drawing design. Issue still approved the building to include the following remains design. Issue still note regarding LED 3. Revise the sign remains intensity: drawing to include the The level of illumination following note provided by the LED regarding LED lights will not exceed the intensity: illumination produced by The level of illumination a single stroke of 30 provided by the LED lights milliamp (ma) neon. will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. OK - done RESUBMITTAL REVIEW CHECKLIST PROJECT #/NAME: ARB 201400085, Chick -Bl -A Signs Original ARB Comment 07/30/2014 Review 08/08/2014 Review 03/17/2015 Review • Currently there is no approved site plan and Issues: Issues: Issue: no ARB approved site and building plan. I • As of 7/30/2014: no revised • As of 7/30/2014: no Sheet 1 Site Plan and Sheet 5 cannot approve this ARB application until ARB application received revised ARB application Landscape Plan are not the there is site plan approval and ARB approval (admin. review) received (admin. review) current approved plans. of the site and building plans. Do not begin • Received. Final SDP under • Received. Final SDP construction of any signs until you have both review under review ARB sign approval and an approved sign Will need to deny ARB Will need to deny ARB permit. application by 08/18/2014 if application by 08/18/2014 deferral request not received. if deferral request not received. • Regarding the freestandin g ign: Regarding the freestanding Issue: sib: 1. Revise the sign drawing with notes to Regarding the freestanding sign: Sheet 1 Site Plan and Sheet 5 1. Revise the sign drawing with clearly indicate just what illuminates. 1. Revise the sign drawing Landscape Plan are not the The zoning ordinance requires that the notes to clearly indicate just with notes to clearly current approved plans. sign have an opaque background. what illuminates. The zoning indicate just what Include a note that the white ordinance requires that the illuminates. The zoning background shall be opaque. sign have an opaque ordinance requires that 2. Revise the sign drawing to include the background. Include a note the sign have an opaque following note regarding LED that the white background background. Include a intensity: shall be opaque. note that the white The level of illumination provided big Issue: Comment not background shall be the LED lights will not exceed the addressed. opaque. illumination produced by a single Note: previous comment Issue: Comment not stroke of 30 milliamp (ma) neon. refers to white background addressed. 3. The sign location and landscaping in error. Note: previous around the sign cannot be evaluated Need the following note on comment refers to until the site plan/landscape plan has drawing: "Cabinet white background in been approved. background shall be error. 4. Sign brick base material must match opaque; only the text & Need the following the approved building material. graphic shall illuminate." note on drawing: Currently, no building material has 2. Revise the sign drawing to "Cabinet background been approved. include the following note shall be opaque; only regarding LED intensity: the text & graphic The level of illumination shall illuminate." Original ARB Comment 07/30/2014 Review 08/08/2014 Review 03/17/2015 Review provided by the LED lights OK - done will not exceed the 2. The sign location and illumination produced by a landscaping around the single stroke of 30 milliamp sign cannot be (ma) neon. OK - done evaluated until the site 3. The sign location and plan/landscape plan has landscaping around the sign been approved. cannot be evaluated until the Waiting for approved site plan /landscape plan has SDP Final. been approved. Waiting for approved SDP Final. 1. Sign brick base material must match the approved building material. Currently, no building material has been approved. OK OK — Done - MM confirmed that Warm Gray 3 color Mayo Blend Belden Brick is what the ARB approved. X Regarding the wall signs: Regarding the wall signs: Regarding the wall signs: OK — SDP and ARB 1. The zoning permit planner will not 1. The zoning permit planner 1. The zoning permit applications have been evaluate the wall signs for compliance will not evaluate the wall planner will not approved. Building elevation with the zoning ordinance until the signs for compliance with the evaluate the wall signs drawings match approved ARB site plan has been approved. zoning ordinance until the for compliance with the elevation drawings sufficiently. 2. The wall signs cannot be evaluated site plan has been approved. zoning ordinance until for compliance with the ARB sign Issue still remains. the site plan has been guidelines until the ARB has 2. The wall signs cannot be approved. Issue still approved the building design. evaluated for compliance remains. 3. Revise the sign drawing to include the with the ARB sign guidelines 2. The wall signs cannot following note regarding LED until the ARB has approved be evaluated for intensity: the building design. Issue compliance with the The level of illumination provided by still remains ARB sign guidelines the LED lights will not exceed the 3. Revise the sign drawing to until the ARB has illumination produced by a single include the following note approved the building Original ARB Comment 07/30/2014 Review 08/08/2014 Review 03/17/2015 Review stroke of '30 milliamp (ma) neon. regarding LED intensity: The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. OK - done design. Issue still remains E E RESUBMITTAL REVIEW CHECKLIST PROJECT #/NAME: ARB 201400085, Chick -fil -A Signs OriLlinal ARB Comment 107/30/2014 Review 108/08/2014 Review Currently there is no approved site plan and no ARB approved site and building plan. I cannot approve this ARB application until there is site plan approval and ARB approval of the site and building plans. Do not begin construction of any signs until you have both ARB sign approval and an approved sign Regarding the freestanding sign: 1. Revise the sign drawing with notes to clearly indicate just what illuminates. The zoning ordinance requires that the sign have an opaque background. Include a note that the white background shall be opaque. 2. Revise the sign drawing to include the following note regarding LED intensity: The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. 3. The sign location and landscaping around the sign cannot be evaluated until the site plan/landscape plan has been approved. 4. Sign brick base material must match the approved building material. Currently, no building material has been approved. Issues: • As of 7/30/2014: no revised ARB application received (admin. review) • Received. Final SDP under review • Will need to deny ARB application by 08/18/2014 if deferral request not received. Regarding the freestanding sign: 1. Revise the sign drawing with notes to clearly indicate just what illuminates. The zoning ordinance requires that the sign have an opaque background. Include a note that the white background shall be opaque. Issue: Comment not addressed. Note: previous comment refers to white background in error. Need the following note on drawing: "Cabinet background shall be opaque; only the text & graphic shall illuminate." 2. Revise the sign drawing to include the following note regarding LED intensity: The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. OK - done 3. The sign location and landscaping around the sign cannot be evaluated until the site plan/landscape plan has been approved. Waiting for approved SDP Final. Issues: • As of 7/30/2014: no revised ARB application received (admin. review) • Received. Final SDP under review • Will need to deny ARB application by 08/18/2014 if deferral request not received. Regarding the freestandine sien: 1. Revise the sign drawing with notes to clearly indicate just what illuminates. The zoning ordinance requires that the sign have an opaque background. Include a note that the white background shall be opaque. Issue: Comment not addressed. Note: previous comment refers to white background in error. Need the following note on drawing: "Cabinet background shall be opaque; only the text & graphic shall illuminate." OK - done The sign location and landscaping around the sign cannot be evaluated until the site plan/landscape plan has been approved. Waiting for approved SDP Final. Original ARB Comment 07/30/2014 Review 08/08/2014 Review 1. Sign brick base material must match the approved building material. Currently, no building material has been approved. OK OK — Done - MM confirmed that Warm Gray 3 color Mayo Blend Belden Brick is what the ARB approved. X Re ag rding the wall signs: Regarding the wall signs: is: is: Re ag rding the wall signs: 1. The zoning permit planner will not 1. The zoning permit planner will not 1. The zoning permit planner will not evaluate the wall signs for compliance evaluate the wall signs for compliance evaluate the wall signs for with the zoning ordinance until the with the zoning ordinance until the site compliance with the zoning site plan has been approved. plan has been approved. Issue still ordinance until the site plan has 2. The wall signs cannot be evaluated for compliance with the ARB sign remains. 2. The wall signs cannot be evaluated for been approved. Issue still remains. 2. The wall signs cannot be evaluated guidelines until the ARB has compliance with the ARB sign guidelines for compliance with the ARB sign approved the building design. until the ARB has approved the building guidelines until the ARB has 3. Revise the sign drawing to include the design. Issue still remains approved the building design. Issue following note regarding LED 3. Revise the sign drawing to include the still remains intensity: following note regarding LED intensity: The level of illumination provided by The level of illumination provided by the LED the LED lights will not exceed the lights will not exceed the illumination illumination produced by a single produced by a single stroke of 30 milliamp stroke of 30 milliamp (ma) neon. (ma) neon. OK - done /k1 In RESUBMITTAL REVIEW CHECKLIST PROJECT #/NAME: ARB 201400085, Chick -fil-A Signs 07/30/2014 OriLinal ARB Comment 1 07/30/2014 Review Currently there is no approved site plan and no ARB approved site and building plan. I cannot approve this ARB application until there is site plan approval and ARB approval of the site and building plans. Do not begin construction of any signs until you have both ARB sign approval and an approved sign permit. Regarding the freestanding sign: 1. Revise the sign drawing with notes to clearly indicate just what illuminates. The zoning ordinance requires that the sign have an opaque background. Include a note that the white background shall be opaque. 2. Revise the sign drawing to include the following note regarding LED intensity: The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. 3. The sign location and landscaping around the sign cannot be evaluated until the site plan/landscape plan has been approved. 4. Sign brick base material must match the approved building material. Currently, no building material has been approved. Regarding the wall signs: 1. The zoning permit planner will not evaluate the wall Issues: • As of 7/30/2014: no revised ARB application received (admin. review) • Received. Final SDP under review • Will need to deny ARB application by 08/18/2014 if deferral request not received. Regarding the freestanding sign: 1. Revise the sign drawing with notes to clearly indicate just what illuminates. The zoning ordinance requires that the sign have an opaque background. Include a note that the white background shall be opaque. Issue: Comment not addressed. Note: previous comment refers to white background in error. Need the following note on drawing: "Cabinet background shall be opaque; only the text & graphic shall illuminate." 2. Revise the sign drawing to include the following note regarding LED intensity: The level of illumination provided by the LED lights wiii not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. OK - done 3. The sign location and landscaping around the sign cannot be evaluated until the site plan/landscape plan has been approved. Waiting for approved SDP Final. 1. Sign brick base material must match the approved building material. Currently, no building material has been approved. OK - material and color approved Regarding the wall signs: 1. The zoning permit planner will not evaluate the wall Original ARB Comment 07/30/2014 Review signs for compliance with the zoning ordinance until the site plan has been approved. 2. The wall signs cannot be evaluated for compliance with the ARB sign guidelines until the ARB has approved the building design. 3. Revise the sign drawing to include the following note regarding LED intensity: The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. for compliance with the zoning ordinance until the site plan has been approved. Issue still remains. 2. The wall signs cannot be evaluated for compliance with the ARB sign guidelines until the ARB has approved the building design. Issue still remains 3. Revise the sign drawing to include the following note regarding LED intensity: The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. OK - done SIGN REVIEW CHECKLIST WITH REFERENCES — Freestanding Signs ARB 201400085, Chick -fil -A 07/10/2014 Updated: 9 -30 -2010 REF CHECKLIST ITEM NOTES TYPE ❑ 8.n Monument signs are preferred to pole- mounted signs. OK — Hanging — single post -mount Pole signs may be considered if existing site conditions rule N/A out the ability to use a monument sign, and only when the pole is in proportion to the sign cabinet or panel. MATERIALS • 8.b Materials used in both the sign and support structures should OK be complementary. They should also support the aesthetics of the Issue — building materials have not yet been building/complex being served by the sign. approved • 8.b It is preferred that the base material match one of the primary Issue - building material not yet approved building materials unless the sign design represents itself as a freestanding N/A element complementing the building. COLORS • 4.e Colors must be harmonious with each other. OK Red: PMS 186 text /graphic White: background Post: black X Colors must not clash with other elements on the site, both OK when viewed in daylight and at night. Overly intense color, (such as dayglo or fluorescent colors), None proposed are prohibited. Updated: 9 -30 -2010 Updated: 9 -30 -2010 REF CHECKLIST ITEM NOTES Use of three colors or less OK — 3 proposed Black and white are colors. Additional colors may be approved if they contribute to a balanced/unified sign design. • 9.c For raceway - mounted channel letters, raceways shall match N/A the wall color. LANDSCAPING • 8.d Use ground cover, shrubs and /or trees to integrate freestanding Planting plan/site plan not approved signs into the overall site landscape. Use plants from the Albemarle County Recommended Plants List. SCALE AND SIZE • 4.b Signs may not exceed the size, height and setback OK — per S. Wright requirements as outlined in Section 4.15 of the Albemarle County Zoning Ordinance (unless the sign has received a variance). • 8.c The structure of a monument sign shall not overwhelm the OK —12' tall including planter sign is located in sign. The structure and the sign that it supports must be in OK proportion to each other. SIGN LETTERING AND TYPEFACE • 4.d Lettering should be in proportion (font size and typeface style) OK to the sign and the building. Use of three typefaces or less. OK— I Updated: 9 -30 -2010 Updated: 9 -30 -2010 REF CHECKLIST ITEM NOTES Additional typefaces may be approved if they contribute to a N/A balanced, legible, unified sign design. X 8.e.iv If outlines of letters are proposed, the outline width must be in None proposed proportion to the letter width. An outline width of 1/8" is the appropriate sign dimension. TRADEMARKS, CORPORATE LOGOS, AND GRAPHICS X 4.f The ARB may require that the color and scale of standard OK templates for trademarks, service marks, corporate logos and graphics be modified. When used, trademarks, service marks, corporate logos and /or OK — integrated appearance graphics should be incorporated as an integral part of the overall sign. LIGHTING X 8.e.i External illumination (or no illumination) is preferred for OK — internal freestanding signs. X S.f Any internal illumination is considered to contribute to visual OK clutter and will be limited. The design will be evaluated for size, balance, complexity, and distance from and relationship to the Entrance Corridor. X 5.e External Illumination should be shielded and not create glare. N/A Lighting should be aimed so as not to project illumination N/A beyond the sign. All external light sources shall be white. N/A Updated: 9 -30 -2010 Updated: 9 -30 -2010 REF CHECKLIST ITEM NOTES X 8.e.ii Ground mounted lighting should be shielded by landscaping so N/A that it is not visible from any adjacent property or right -of- way. X 5.h An exposed light source that forms the body of a sign, (such as None proposed exposed neon signs), shall not be used. X S.g All illumination shall be non - blinking. None proposed X S.c External illumination (or no illumination) is preferred for None proposed approved graphics /logos; internal illumination may be considered for approval. OK X 8.e.iv Cabinet signs shall have a non - illuminated background, or an Issue — not addressed — not clear as to what opaque (zero light transmission) background. illuminates Cabinet signs shall be constructed such that no light spills OK outward from the top, bottom, sides or back. X 8.e.iii Channel letters (although not likely appropriate for OK freestanding signs) with translucent faces shall be constructed such that no light spills outward from the top, bottom, sides or back. If back -lit (halo -lit), the faces and returns of channel letters Not proposed shall be opaque. ARB ACTIONS X (ARB Billboards are inappropriate for the Entrance Corridors. None proposed Action Memo: 1/19/10) No refacing design (no combination of colors, images, text and layout) will make the billboard an appropriate appearance. Updated: 9 -30 -2010 Updated: 9 -30 -2010 REF CHECKLIST ITEM NOTES Existing billboards may not increase in size and may not include modifications beyond the existing sign surface. No new illumination of any kind may be added to the billboard. • (ARB Reader boards shall have an opaque background. None proposed Action Memo: 1/19/10) Only the letters may be illuminated, but illumination is not required. Reader boards shall not exceed 40% of the size of the overall sign face. The background color of the reader board shall be black or some other color already on the sign face. Construction of the reader board shall be integral with the main sign. The track holding the letters shall have minimal visual impact. • (ARB Synthetic stucco is acceptable for signs if mounted on a solid None proposed Action surface such as concrete block and if limited to use as a flat Memo: surface as a background for lettering. 5/4/09) Styrofoam backing is not acceptable. X Red acrylic #2283 has been determined to be an inappropriate OK — Red acrylic 2793 proposed color for signs. Updated: 9 -30 -2010 Updated: 9 -30 -2010 REF CHECKLIST ITEM NOTES Pantone color match for 2283 is 485C. Red #2793 has been approved as an acceptable substitute. Pantone color match for 2793 is 187C. X (ARB Scale, location, proximity to existing building(s), quality of Issue — site plan and landscape plan not approved Action sign materials, and sign height and other pre- existing Memo: conditions determine how much planting is required at the 10/5/09) base of the freestanding sign. X If LED lighting is proposed the sign drawing must state The Issue — note missing level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. X Internal LED for the gas pricing: Daytime intensity limited to N/A 70% of maximum intensity; Nighttime intensity limited to 16% of maximum intensity with automatic dimming at dusk. X ARB Visual clutter resulting from adjacency, for example at the OK Action Hardee's locations, is a reasonable basis for not allowing Memo: illumination of the graphic. 5/7/12 Updated: 9 -30 -2010 SIGN REVIEW CHECKLIST with REFERENCES — Wall Sign, Single Business ARB 201400085, Chick -fil -A 07/10/2014 REF CHECKLIST ITEM NOTES TYPE • 9.b For internally illuminated signs, channel lettering OK — channel letter (mounted on a raceway or individual letters) is preferred to cabinet signs. • 5.b When channel letters cannot be adequately accommodated, N/A internally illuminated cabinet signs may be considered. • 6 Reader boards are discouraged. None proposed MATERIALS • 4.c Materials used in the sign should complement the building OK being served by the sign. COLOR • 4.e Color for raceway- mounted channel letters, the raceway OK — direct -mount shall match the wall color. Sign colors must be harmonious with each other. OK Sign colors must not clash with the site, when viewed in OK daylight and at night. Overly intense color, (such as dayglo or fluorescent None proposed colors), are prohibited. Use of three colors or less (black and white considered as OK— 1 colors) Additional colors may be approved if they contribute to the sign balance /unity. SIZE, SCALE, PROPORTION, AND LOCATION • 4.b Signs may not exceed the size, height and setback Issue —Zoning permit planner has not reviewed requirements as outlined in Section 4.15 of the Albemarle County Zoning Ordinance (unless sign has a variance). REF CHECKLIST ITEM NOTES X Appendix A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall Issue: Cannot be determined until building A.A area is a good working proportioning system for placing a elevations are approved sign. X Appendix Color, form, surface pattern, shape, and disposition of Issue: Cannot be determined until building A.A.4 elements and openings in an architectural design can affect elevations are approved our perception of scale and can impact the appearance of a sign on a building. X 9.d The wall sign's size must coordinate with the architectural Issue: Cannot be determined until building element's size. elevations are approved The sign should not over -crowd the architectural element, Issue: Cannot be determined until building the wall, or the sign area. elevations are approved Buildings and building elements should not be used as Issue: Cannot be determined until building billboards. elevations are approved X 9.a Wall signs must integrate with the building's architecture. Issue: Cannot be determined until building elevations are approved The sign placement should not obscure architectural Issue: Cannot be determined until building features or details, (such as cornices, windows, columns, elevations are approved pilasters and paneling). X 9.d An appropriate height for channel letters in a 30" high sign N/A band is 18 ". This allows 6" of unoccupied space above and below the letters. 4" of clear space above, below, and to the sides of a channel letter sign is considered a minimum, with larger clearances required for larger sign bands. Degree of visibility, the distance from the Entrance Corridor, and the architectural design of the building /area will determine sign size, placement, and proportions. REF CHECKLIST ITEM NOTES X 4.d Lettering should be in proportion (font size and typeface style) to the sign and the building. OK Use of three typefaces or less. OK— I Additional typefaces may be approved if they contribute to a balanced /legible /unified sign design. N/A X 9. e. iv The width of the outline must be in proportion to the width of the letter. None proposed An outline width of 1/8" has been found to be an appropriate sign dimension. TRADEMARKS, CORPORATE LOGOS AND GRAPHICS X 4.f The ARB may require that the color and scale of standard templates for trademarks, service marks, corporate logos and graphics be modified. OK When used, trademarks, service marks, corporate logos and /or graphics should be incorporated as an integral part of the overall sign. OK — integrated X 5.a External (or no) illumination is preferred for approved graphics /logos; OK — internal X 5.b internal illumination may be considered for approval on a case -by -case basis. OK LIGHTING X 9.e.i External (or no) illumination is preferred for wall signs. OK — internal X 5.f Any internal illumination is considered to contribute to visual clutter and will be limited. OK X 5.c Internal illumination design approval will be evaluated on size, balance, complexity, and distance from the Entrance Corridor. OK X 9.e.iv The backgrounds of such cabinet signs must be made N/A REF CHECKLIST ITEM NOTES opaque (zero light transmission). X 5.e External illumination should be shielded and not create N/A glare. All external light sources shall be white. N/A X 9. ii Sign lighting (external) should be shielded so that it N/A illuminates only face of the sign and does not shine beyond the edge of the sign. X 93ii Channel letters with translucent faces must have no light OK spilling outward from the top, bottom, sides or back. Faces and returns of channel letters shall be opaque when N/A back -lit (halo -lit). X 9. iv Cabinet signs shall have a non - illuminated background, or N/A an opaque (zero light transmission) background. Cabinet signs shall be constructed such that no light spills N/A outward from the top, bottom, sides or back. X 5.g All illumination shall be non - blinking. None proposed X 5.h An exposed light source that forms the body of a sign, None proposed (such as exposed neon signs), shall not be used in the Entrance Corridors. ARB ACTIONS X If LED lighting is proposed the sign drawing must state Issue: note missing The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. X Red acrylic #2283 has been determined to be an OK — red acrylic 2793 proposed inappropriate color for signs. Pantone color match for 2283 is 485C. Red #2793 has been approved as an acceptable substitute. REF CHECKLIST ITEM NOTES Pantone color match for 2793 is 187C. X ARB Visual clutter resulting from adjacency, for example at the OK Action Hardee's locations, is a reasonable basis for not allowing Memo: illumination of the graphic. 5/7/12 Completeness Check for Signs Project # /Name: _ARB201400085, Chick fil -A_ Date Received at County: _06/30/2014 Date Received in Design Planning: _06/30/2014 Date of Checklist Check: _06/30/2014_ Assigned to /Date: _06/30/2014 FEES 3. ARB Review —Will the permanent sign(s) be constructed in an Entrance Corridor? (Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) X Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $120.00 Comprehensive Sign Review. See ARB requirements next pages.) OK ❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee Comprehensive Sign Review. See ARB requirements next pages) ❑ No (This sign will not be constructed in an Entrance Corridor) $ 0.00 FEE TOTAL (Please add all the amounts checked in sections I — 3): $ FREESTANDING SIGNS A. Submittal Requirements ❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions. OK ❑ Distance from the sign to the property lines and/or edge of the VDOT right -of -way. OK ❑ If the sign will be located in an easement, a letter of approval from the easement holder will be required. N/A ❑ A to -scale color illustration of the proposed sign showing ❑ Dimensions of the sign, including overall height from the ground; cabinet size, length, width and depth; base size, etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.) OK ❑ Proposed lettering and/or graphics in their proposed location. OK ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color illustration of the front and side elevations of the sign showing: • If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) Missing • Identification of proposed materials and colors. Include standard color id numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc. OK • Provide accurate physical samples of all colors proposed, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) • Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes. OK • Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies.) WALL SIGNS ❑ A drawing, to scale, showing dimensions of the sign (length, height, depth). OK ❑ Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing ❑ The sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also include these dimensions on the diagrams provided in Appendix B) OK ❑ Sign lettering and /or graphics in their proposed location. OK ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: • Indication of sign type (channel letters, cabinet, panel, etc.). OK • Indicate on the drawings the proposed materials and colors. Include standard color identification numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is attached. OK • Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) • Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17. Missing o For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) ILLUMINATION REQUIREMENTS ❑ The location of proposed light fixtures identified on a plan and/or elevation Missing ❑ Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. Missing NOTES: