The URL can be used to link to this page

Home My WebLink AboutARB201600096 Checklist 2017-02-15RESUBMITTAL REVIEW CHECKLIST PROJECT #/NAME: ARB 2016-96. Stone Ridge Commons Sign Date 02-15-2017 Previous ARB Comment 01-27-17 Review 02-15-17 Review X 1. Revise the sign drawings to include a note indicating the sign is to be non-illuminated. Not addressed. OK - done X 2. Include a latest revision date on each of the three drawings. Not addressed. OK - done RESUBMITTAL REVIEW CHECKLIST PROJECT #/NAME: ARB 2016-96. Stone Ridge Commons Sign Date 01-27-2017 Previous ARB Comment 01-27-17 Review X 1. Revise the sign drawings to include a note indicating the sign is to be non-illuminated. Not addressed. X 2. Include a latest revision date on each of the three drawings. Not addressed. Updated: 9-30-2010 1 SIGN REVIEW CHECKLIST WITH REFERENCES – Freestanding Signs ARB 2016-96, Stone Ridge Commons 12-16-2016 REF CHECKLIST ITEM NOTES TYPE X 8.a Monument signs are preferred to pole-mounted signs. OK – freestanding panel Pole signs may be consid ered if existing site conditions rule out the ability to use a monument sign, and only when the pole is in proportion to the sign cabinet or panel. N/A MATERIALS X 8.b Materials used in both the sign and support structures should be complementary. OK They should also support the aesthetics of the building/complex being served by the sign. OK X 8.b It is preferred that the base material match one of the primary building materials N/A unless the sign design represents itself as a freestanding element complementing the building. Yes COLORS X 4.e Colors must be harmonious with each other. OK Colors must not clash with other elements on the site, both when viewed in daylight and at night . OK Overly intense color, (such as dayglo or fluo rescent colors), are prohibited. None proposed Use of three colors or less Black and white are colors. OK Use of 4 colors mitigated by their close appearance. Updated: 9-30-2010 2 REF CHECKLIST ITEM NOTES Additional colors may be approved if they contribute to a balanced/unified sign desig n. X 9.c For raceway-mounted channel letters, raceways shall match the wall color. N/A LANDSCAPING X 8.d Use ground cover, shrubs and/or trees to integrate freestanding signs into the overall site landscape. OK Use plants from the Albemarle County Recommended Plants List. OK SCALE AND SIZE X 4.b Signs may not exceed the size, height and setback requirements as outlined in Section 4.15 of the Albemarle County Zoning Ordinance (unless the sign has received a variance). Issue – not reviewed by Stewart Wright yet. X 8.c The structure of a monument sign shall not overwhelm the sign. OK The structure and the sign that it supports must be in proportion to each other. OK SIGN LETTERING AND TYPEFACE X 4.d Lettering should be in proport ion (font size and typeface style) to the sign and the building. OK Use of three typefaces or less. OK – 2 Additional typefaces may be approved if they contribute to a balanced, legible, unified sign design. N/A X 8.e.iv If outlines of letters are proposed, the outline width must be in proportion to the letter width. None proposed Updated: 9-30-2010 3 REF CHECKLIST ITEM NOTES An outline width of 1/8” is the appropriate sign dimension. N/A TRADEMARKS, CORPORATE LOGOS, AND GRAPHICS X 4.f The ARB may require that the color and scale of standard templates for trademarks, service marks, corporate logos and graphics be modified. OK When used, trademarks, service marks, corporate logos and/or graphics should be incorporated as an integral part of the overall sign. OK LIGHTING X 8.e.i External illumination (or no illumination) is preferred for freestanding signs. Issue – drawing needs to state sign is to be non- illuminated. X 5.f Any internal illumination is considered to contribute to visual clutter and will be limited. The design will be evaluated for size, balance, complexity, and distance from and relationship to the Entrance Corridor. N/A X 5.e External Illumination should be shielded and not create glare. N/A Lighting should be aimed so as not to project illumination beyo nd the sign. N/A All external light sources shall be white. N/A X 8.e.ii Ground mounted lighting should be shielded by landscaping so that it is not visible from any adjacent property or right -of- way. N/A X 5.h An exposed light source that forms the body of a sign, (such as exposed neon signs), shall not be used. None proposed Updated: 9-30-2010 4 REF CHECKLIST ITEM NOTES X 5.g All illumination shall be non-blinking. None proposed X 5.c External illumination (or no illumination) is preferred for approved graphics/logos; N/A internal illumination may be considered for approval. N/A X 8.e.iv Cabinet signs shall have a non-illuminated background, or an opaque (zero light transmission) background. N/A Cabinet signs shall be constructed such that no light spills outward from the top, bottom, sides or back. N/A X 8.e.iii Channel letters (although not likely appropriate for freestanding signs) with translucent faces shall be constructed such that no light spills outward from the top, bottom, sides or back. N/A If back-lit (halo-lit), the faces and returns of channel letters shall be opaque. N/A ARB ACTIONS X (ARB Action Memo: 1/19/10) Billboards are inappropriate for the Entrance Corridors. None proposed No refacing design (no combination of colors, images, text and layout) will make the billboard an appropriate appearance. Existing billboards may not increase in size and may not include modifications beyond the existing sign surface. No new illumination of any kind may be added to the billboard. Updated: 9-30-2010 5 REF CHECKLIST ITEM NOTES X (ARB Action Memo: 1/19/10) Reader boards shall have an opaque background. None proposed Only the letters may be illuminated, but illumination is not required. Reader boards shall not exceed 40% of the size of the overall sign face. The background color of the reader board shall be black or some other color already on the sign face. Construction of the reader board shall be integral with the main sign. The track holding the letters shall have minimal visual impact. X (ARB Action Memo: 5/4/09) Synthetic stucco is acceptable for signs if mounted on a solid surface such as concrete block and if limited to use as a flat surface as a background for lettering. None proposed Styrofoam backing is not acceptable. X Action on ARB- P(BP)-2001-12 Wood Grill Red acrylic #2283 has been determined to be an inappropriate color for signs. Pantone color match for 2283 is 485C. Red #2793 has been approved as an acceptable substitute. Pantone color match for 2793 is 187C. (See below.) No red color proposed. 12/21/15 action on ARB 2015-114 & -115 Shell Signs Generally, for signs in the Entrance Corridors, red 485 may be acceptable on a case-by-case basis as a secondary color. N/A Updated: 9-30-2010 6 REF CHECKLIST ITEM NOTES X (ARB Action Memo: 10/5/09) Scale, location, proximity to existing building(s), quality of sign materials, and sign height and other pre-existing conditions determine how much planting is required at the base of the freestanding sign. OK X If LED lighting is proposed the sign drawing must state The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. Non-illuminated X Internal LED for the gas pricing: Daytime intensity limited to 70% of maximum intensity; Nighttime intensity limited to 16% of maximum intensity with automatic dimming at dusk. N/A X ARB Action Memo: 5/7/12 Visual clutter resulting from adjacency, for example at the Hardee’s locations, is a reasonable basis for not allowing illumination of the graphic. OK X Miscellaneous Need latest revisio n dates on all 3 drawings.