Loading...
HomeMy WebLinkAboutARB201700030 Checklist 2017-04-06APPLICATION REVIEW HISTORY ARB #/Name ARB201700030 Walmart #1780 Vision Center Sign. ACTION DATE NOTES County received application 4/3/17 Corresponding submittal deadline/ARB meeting date 4/3/17 filing deadline; 5/15/17 ARB meeting Transfer from intake to ARB Staff _ First ARB staff review 4/5/17 Complete application Comments to applicant 4/5/17 Letter and email sent Resubmittal received by staff Resubmittal reviewed by staff Were all comments addressed? Comments to applicant Resubmittal received by staff Resubmittal reviewed by staff Were all comments addressed? Comments to applicant Resubmittal received Resubmittal reviewed Approval letter sent 4/6/17 CoA letter and email sent ARB meeting date ARB action SIGN REVIEW CHECKLIST with REFERENCES — Wall Sign, Single Business Updated: 6-17-2016 REF CHECKLIST ITEM NOTES TYPE ❑ 9.b For internally illuminated signs, channel lettering OK (mounted on a raceway or individual letters) is preferred to cabinet signs. ❑ S.b When channel letters cannot be adequately accommodated, N/A internally illuminated cabinet signs may be considered. ❑ 6 Reader boards are discouraged. N/A MATERIALS ❑ 4.c Materials used in the sign should complement the building OK. The materials are the same as were approved in being served by the sign. ARB201600143 (12/21/2016) COLOR ❑ 4.e Color for raceway -mounted channel letters, the raceway N/A. The letters will be individually bolted to the shall match the wall color. fagade Sign colors must be harmonious with each other. OK: Channel letter face, trim caps, and returns are white; graphic colors are harmonious Sign colors must not clash with the site, when viewed in OK daylight and at night. Overly intense color, (such as dayglo or fluorescent OK colors), are prohibited. Use of three colors or less (black and white considered as OK: white only color used. colors) Additional colors may be approved if they contribute to the sign balance/unity. SIZE, SCALE, PROPORTION, AND LOCATION ❑ 4.b Signs may not exceed the size, height and setback OK requirements as outlined in Section 4.15 of the Albemarle REF CHECKLIST ITEM NOTES County Zoning Ordinance (unless sign has a variance). ❑ Appendix A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall OK A.A area is a good working proportioning system for placing a sign. ❑ Appendix Color, form, surface pattern, shape, and disposition of OK A.A.4 elements and openings in an architectural design can affect our perception of scale and can impact the appearance of a sign on a building. ❑ 9.d The wall sign's size must coordinate with the architectural OK element's size. The sign should not over -crowd the architectural element, OK the wall, or the sign area. Buildings and building elements should not be used as OK billboards. ❑ 9.a Wall signs must integrate with the building's architecture. OK The sign placement should not obscure architectural N/A features or details, (such as cornices, windows, columns, pilasters and paneling). ❑ 9.d An appropriate height for channel letters in a 30" high sign band is 18". OK This allows 6" of unoccupied space above and below the OK letters. 4" of clear space above, below, and to the sides of a OK channel letter sign is considered a minimum, with larger clearances required for larger sign bands. Degree of visibility, the distance from the Entrance OK Corridor, and the architectural design of the building/area REF CHECKLIST ITEM NOTES will determine sign size, placement, and proportions. ❑ 4.d Lettering should be in proportion (font size and typeface style) to the sign and the building. OK Use of three typefaces or less. OK Additional typefaces may be approved if they contribute to a balanced/legible/unified sign design. N/A ❑ 9.e.iv The width of the outline must be in proportion to the width of the letter. N/A An outline width of 1/8" has been found to be an appropriate sign dimension. N/A TRADEMARKS, CORPORATE LOGOS AND GRAPHICS ❑ 4.f The ARB may require that the color and scale of standard templates for trademarks, service marks, corporate logos and graphics be modified. N/A When used, trademarks, service marks, corporate logos and/or graphics should be incorporated as an integral part of the overall sign. N/A ❑ 5.a External (or no) illumination is preferred for approved graphics/logos; N/A ❑ 5.b internal illumination may be considered for approval on a case-by-case basis. N/A LIGHTING ❑ 9.e.i External (or no) illumination is preferred for wall signs. OK: no illumination ❑ 5.f Any internal illumination is considered to contribute to visual clutter and will be limited. N/A ❑ 5.c Internal illumination design approval will be evaluated on size, balance, complexity, and distance from the Entrance Corridor. N/A REF CHECKLIST ITEM NOTES ❑ 9.e.iv The backgrounds of such cabinet signs must be made N/A opaque (zero light transmission). ❑ 5.e External illumination should be shielded and not create N/A glare. All external light sources shall be white. N/A ❑ 9.ii Sign lighting (external) should be shielded so that it N/A illuminates only face of the sign and does not shine beyond the edge of the sign. ❑ 9.iii Channel letters with translucent faces must have no light N/A spilling outward from the top, bottom, sides or back. Faces and returns of channel letters shall be opaque when N/A back -lit (halo -lit). ❑ 9.iv Cabinet signs shall have a non -illuminated background, or N/A an opaque (zero light transmission) background. Cabinet signs shall be constructed such that no light spills N/A outward from the top, bottom, sides or back. ❑ 5.g All illumination shall be non -blinking. N/A ❑ 5.h An exposed light source that forms the body of a sign, N/A (such as exposed neon signs), shall not be used in the Entrance Corridors. ARB ACTIONS ❑ If LED lighting is proposed the sign drawing must state N/A The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. ❑ Action on ARB -P Red acrylic #2283 has been determined to be an N/A (BP)2001-12 inappropriate color for signs. Pantone color match Wood Grill for 2283 is 485C. Red #2793 has been approved as an acceptable substitute. Pantone color match REF CHECKLIST ITEM NOTES for 2793 is 187C. (See below.) 12/21/15 action on Generally, for signs in the Entrance Corridors, red 485 N/A ARB 2015-114 & - may be acceptable on a case-by-case basis as a 115 Shell Signs secondary color. ARB Visual clutter resulting from adjacency, for example at the N/A Action Hardee's locations, is a reasonable basis for not allowing Memo: illumination of the graphic. 5/7/12 ARB Accent color letters can be used in a sign when portrayed N/A Action as a graphic, up to 33% of the length of the sign. Memo: 8/3/2015 Completeness Check for Signs Project #/Name: _AR132017-00030 Walmart #1780 Vision Center Sign Date Received at County: _3/31/17 Date Received in Design Planning: _4/4/17 Date of Checklist Check: _4/5/17 Assigned to/Date: _H. McMahon 4/4/17 FEES ft 3. ARB Review — Will the permanent sign(s) be constructed in an Entrance Corridor? (See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors) ® Yes ('Phis sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00 Comprehensive Sign Review. See ARB requirements next pages) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee Comprehensive Sign Review. See ARB requirements next pages) ❑ No (This sign will not be constructed in an Entrance Corridor) $ 0.00 FEE TOTAL (Please add all the amounts checked in sections I — 3): $ FREESTANDING SIGNS A. Submittal Requirements ❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions. ❑ Distance from the sign to the property lines and/or edge of the VDOT right-of-way. ❑ If the sign will be located in an easement, a letter of approval from the easement holder will be required. ❑ A to -scale color illustration of the proposed sign showing ❑ Dimensions of the sign, including overall height from the ground; cabinet size, length, width and depth; base size, etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.) ❑ Proposed lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color illustration of the front and side elevations of the sign showing: o If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) o Identification of proposed materials and colors. Include standard color id numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc. o Provide accurate physical samples of all colors proposed, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes. o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies.) WALL SIGNS ® A drawing, to scale, showing dimensions of the sign (length, height, depth). ® Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing ® The sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also include these dimensions on the diagrams provided in Appendix B) ® Sign lettering and/or graphics in their proposed location. ® Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: o Indication of sign type (channel letters, cabinet, panel, etc.). o Indicate on the drawings the proposed materials and colors. Include standard color identification numbers (Panton, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is attached. o Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) o Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17. o For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it. ILLUMINATION REQUIREMENTS ❑ The location of proposed light fixtures identified on a plan and/or elevation ❑ Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. NOTES: The application is complete.