The URL can be used to link to this page

Home My WebLink AboutARB201700060 Checklist 2017-06-08 Completeness Check foj 'Signs Project#/Name: r.(/':..j.'7 . / Date Received at County: 11 7 Date Received in Design Planning: G Date of Checklist Check: =// /I 7 Assigned to/Date: FEES 3. ARB Review— Will the permanent sign(s)be constructed in an Entrance Corridor? (See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $120.00 Comprehensive Sign Review. See ARB requirements next page ) ---- • Yes (This sign will be constructed in an Entrance Corridor an it does meet th conditions of aWaive Fee Comprehensive Sign Review. See ARB requirements next p ❑ No (This sign will not be constructed in an Entrance Corridor) ' $0.00 FEE TOTAL(Please add all the amounts checked in sections 1—3): $ FREESTANDING SIGNS A. Submittal Requirements ❑ Site plan or later pproved plat showing,to scale,the proposed ocation of the sign(s)with dimensions. ❑ Distance from the s to the property lines and/or edge of thcVDOT right-of-way. ❑ If the sign will be locate an easement,a letter of approv from the easement holder will be required. ❑ A to-scale color illustration of the j 'oposed sign show' g ❑ Dimensions of the sign,including overfill height'°'fom the ground; cabinet size, length, width and depth;base size, etc. (Be sure to also include these dime>tsions on the diagrams provided in the Sign Permit Application packet.) ❑ Proposed lettering and/or graphics in their osed location. ❑ Entrance Corridor Requirements: If the sigrr`is to benstructed in an Entrance Corridor, also provide a color illustration of the front and side elevations of sign shog: o If internally illuminated, indicate which'areas of the sign ar&-opaque and which are illuminated.Internally illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through. When lit only from behind,the coloyfof an opaque material cannot i'.detected nor can objects be seen through it.) o Identification of proposed materials and colors. Include standard color'id numbers(Pantone, Benjamin Moore, Acrylic, etc.)for all materials,text,graphics,base, faces,trim caps,returns, etc. o Provide accurate physical samples of all colors proposed,preferably in the material proposed. (Paint chips that accurately reflect the proposed dolors are acceptable.) o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes. o Additional submittal materials Vinay be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies.) (;) WALL SIGNS Adrawing,to scale,showing di eidns of the sign(length,height,depth). 4levation drawing(s)or modified photograph of the entire building,to scale and in color,showing V❑ The sign ation on the building,sign Ifhight above grade,and the length of building frontage.(Be sure to also include these dimensions on the diagrams provided in Appendix B.) Sign lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: r✓ ''`Indication of sign type(channel letters,cabinet,panel,etc.). o Indicate on the drawings the proposed materials and colors. Include standard color identification numbers (Panton,Benjamin Moore,Acrylic,etc.)for all materials,text,graphics,faces,trim caps, etc.For channel letter signs,indicate on the drawing that the racyy color shall match the color of the wall to which the raceway is attached. 1,o Provide accurate physical samples of all colors proposed in the sign,preferably in the material proposed.(Paint chips that accurately reflect the proposed colors are acceptable.) N,, .. v Location of proposed light fixtures and manufacturer cut sheets describing illumination type,intensity,style,, shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17.1 1 eft r internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque materials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be detected nor can objects be seen through it.) ILLUMINATION REQUIREMENTS Ei7 location of proposed light fixtures identified on a plan and/or elevation Manufacturer cut sheets describing illumination type,intensity, style,shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. ` '` 13.a w+/ Gr -cL , NOTES: